|
Specifications
Details (click here)
Fabricated from white polypropylene, an extremely durable
and non-corrosive thermoplastic; highly resistant to most
acids, solvents and other liquids. Units are made to order
in five basic sizes. The basic console fume hood requires a
remote exhaust system. Unit consists of a white
polypropylene structure with a sliding adjustable clear
acrylic sash, internal fluorescent lighting, front panel for
controls, a solid reinforced work surface with front lip,
removable rear baffles for cleaning, and hinged doors for
storage below the work surface.
(VERTICAL COUNTER-BALANCED SASH pictured)
|
|
SPECIFICATIONS
Construction :
-
1/2" & 3/8"
white stress relieved polypropylene.
-
Adjustable
rear wall baffles for exhaust air.
-
Heat welded
support seams for additional strength.
-
Reinforced
work surface for heavy loads.
-
Vented storage
cabinet
-
</*0.5" static
pressure drop across hood
-
Hoods are
fabricated with all internal plumbing, electrical &
instrumentation.
-
Mechanical leg
leveling
-
Rear exhaust
plenum terminates at 10" dia. collar.
-
Angle sliding
face shield with 12" opening at face.
-
6' & 8' shield
in 2-sections with center support
(STANDARD FUME HOOD pictured)
Electrical & Power requirements :
-
All electrical
component are UL Approved.
-
Standard 115V,
15A, 1 Ph, 60 Hz.
-
Junction box
for hard wiring.
Lighting :
OPTIONS :
-
CONSTANT VOLUME HOODS
Also Available
-
Electrical
Duplex GFI receptacles with Poly carbonate cover
-
Exhaust
Failure Audio / Video Alarm
-
Counter
balance front SASH (With vertical front design)
-
PP Sink with
drain
-
PP faucets
with direct or remote control valves
-
Teflon DI
Water spray gun
-
Teflon
Nitrogen spray gun
-
PP Vacuum
fixture (Table mount)
-
On site
installation by LM Air Technology, Inc.
|
