MWPS Series – Modular Wet Process Station

View Model/Dimensions & Sample Drawings

Applications:

Semiconductor, Microelectronics, Waste & Water Treatment, Research & Trace Metal Labs, Chemical Analysis, Pharmaceutical Manufacturing, Curing, Etching Processes, Plating Processes, Cleaning Processes, Photonics

Description:

Wet process stations are manufactured as free-standing units for use in labs and cleanrooms. The unit is constructed of white, stress relieved polypropylene (also Flame retardant – UL94VO, FM4910), a highly durable acid & solvent resistant material. Units are custom made, incorporating all the options necessary for a specific function, minimal pressure drops. (requires facility exhaust).  The MWPS offers great flexibility & upgradeability including replacement of work surfaces, control panels, etc.

Construction:

  • Heat welded seams for extra strength.
  • 1/2″ & 3/8″ white stress relieved polypropylene
  • Perforated or solid work surface radiused front edge.
  • Vented Base Cabinet including leg levelers
  • Polypropylene Hinges, handles, screws – No Exposed Metals
  • Rear exhaust port for vertical or horizontal connection.
  • Hinged vented doors on storage area.
  • Designed to have minimal pressure drop.
  • Leg Leveler – heavy duty Polypropylene adjustable from inside the base cabinet
  • All internal plumbing & electrical, terminating at bulkhead fittings on rear wall

Electrical & Power Requirements:

All electrical components are UL / NEC Compliant, Standard 115V, 15A, 1 Ph, 60 Hz, Junction box (sealed – weather tight) for hard wiring

Options:

  • Electrical duplex receptacle
  • Exhaust Failure Audible / Visual Alarm
  • Polypropylene Sink with drain
  • Polypropylene faucets with direct or remote control valves
  • Fixtures including, DI Water spray gun, Nitrogen spray gun, Vacuum, Air, Gas
  • Onsite installation by LM Air’s trained, professional installation staff
  • Flame Retardant Polypropylene construction available – CPVC, FM4910, UL94V0
  • Epoxy or Stainless Steel Countertops – wells
  • Special process Tanks, Baths, Sinks, Hotplates, Spinners, Rinsers, Wells

Model/Dimensions:

LM Air                              Minimum Exhaust
Model

Width

Air Volume

Negative Resistance

MWPS-4

48″

400

.50 IWG

MWPS-5

60″

600

.50 IWG

MWPS-6

72″

600

.50 IWG

MWPS-8

96″

700

.50 IWG

Sample Drawings: