Testimonial: Battelle Marine Sciences Laboratory

Pete Daniele, from LM Air Technology, asked if I would be willing to give you an honest appraisal of our experience with his company and their products, which I am happy to do.

We are in the process of incrementally renovating all of the individual research laboratories in one of our buildings, and have completed three labs to date. All three of these labs require non-metal construction materials, so we specified polypropylene casework and hoods. When we published our first Request For Proposal for polypropylene casework and fume hoods, using Nuaire specifications, we received our first-time response from LM Air. We had a short lead time for the construction start, and LM Air had the best proposal for meeting our short deadline, as well as the most competitive price. Until that time, we had no experience with LM Air, so we did a thorough check of their references and found them to be very good. Our lead architect and our engineering group decided to give them a try since their references were solid, they had the shortest lead time, and the best price of all the other bidders. In the past, we used Nuaire for our plastic casework and hoods.

 

Click here to read the complete press release.

 

Posted in Featured News, News | Comments closed

Cleanroom Magazine: LM Air Product Release UL 1805 Classified

LM Air Technology’s polypropylene fumehood product line is UL 1805 classified. The PFH series has been designed to function at the current lower face velocities and can be used as variable flow or constant volume hoods. A flush design is incorporated into the front face and counterbalanced sash including the under sash mounted airfoil. The hoods are available at 34 in deep (fitting through standard door openings) and widths from 3 to 8 ft. Vented base cabinets are incorporated and integral to the hood.

 

Click here to read the complete press release.

Posted in Featured News, News | Comments closed

Laboratory Design: Hood achieves UL status

LM Air Technology’s PFH Series polypropylene fume hood product line is the first product of its type to achieve UL 1805 classification. The hoods have been designed, engineered, and tested to incorporate the latest in technology, performance, and ergonomic design. The UL 1805 standard, a respected third-party standard, encompasses the overall construction, quality, materials, electrical (NEC with UL components), flammability, acid testing, and ASHRAE 110 containment performance. PFH Series hoods have been designed to function properly at the current lower face velocities and can be used as variable flow or constant volume hoods. A sleek flush design is incorporated into the front face and counterbalanced sash including the under-sash-mounted airfoil. PFH Series hoods are available at 34-in. deep (fitting through standard door openings) in sizes from 3- to 8-ft wide. Vented base cabinets are incorporated and integral to the hood.

 

Click here to read the complete press release.

Posted in Featured News, News | Comments closed

Laboratory Equipment Magazine: Fume Hoods are UL-Classified

LM Air Technology’s PFH Series Polypropylene fume hoods are UL 1805 Classified. The hoods have been designed, engineered and tested to incorporate enhanced technology, performance and ergonomic design. The UL 1805 standard encompasses the overall construction, quality, materials, electrical, flammability, acid testing and ASHRAE 110 containment performance. The fume hoods have been designed to function properly at the current lower face velocities, and can be used as variable flow or constant volume hoods. A sleek flush design is incorporated into the front face and counterbalanced sash, including the under-sash-mounted airfoil. The hoods are available at 34” D (fitting through standard door openings) in sizes from 3 to 8 ft widths. UL 1805 is the first UL standard developed specifically for labeling fume hoods. The standard provides testing and performance criteria, giving customers assurance of a safe product and manufacturers a comprehensive product certification.

 

 

Click here to read the complete press release

Posted in Featured News, News | Comments closed

LM Air Technology Receives Underwriters Laboratories – UL 1805 Classification

Announcement – “UL 1805 Classified” – Polypropylene Hoods

 

Setting the standard for Polypropylene chemical/acid fume hood manufacturers; LM Air Technology has received Underwriters Laboratories – UL 1805 Classification – the fume hood standard.  Our “UL 1805 Classified Fume Hoods” are tested for flammability, electrical, acid resistance, air flow, operator protection, construction and mechanical hazards.  LM Air is also an active member of SEFA (Scientific Furniture & Equipment Association).

 

Click here to visit UL’s online Certifications Directory.

Posted in Featured News, News | Comments closed

LAB of the Year Award – 2009

Palisades, NY – Amid cheers from hundreds of scientists & guests, Columbia’s Lamont-
Doherty

Earth Observatory cut the ribbon at its $45 million Gary C. Comer Geochemistry Building. The ultra-modern facility is “the step forward that we need to accelerate our efforts to understand and predict the important changes that will impact the way we live with our planet,” Lamont director G Michael Purdy told the crowd. It comes “at a time when, after decades of apathy, humankind is at last awakening to the critical role that the planet’s environment plays in everyone’s well-being.”

 

The 63,000-square-foot structure is designed for high energy efficiency and harmony with its rural landscape along the Hudson River. The facility will provide updated laboratories to more than 80 geochemists studying everything from global climate change to the transportation of contaminants through water. The new facility was built in accordance with the Leadership in Energy and Environmental Design, or LEED, program, which is operated by the Green Building Council. These labs will meet best practices described in the EPA’s Labs21 program. The Boston architectural firm of Payette & Associates designed the building. Payette has a reputation for designing innovative, but functional buildings with an open design concept.

 

The NJ based Cleanroom & Lab Equipment manufacturer, LM Air Technology, Inc., fabricated the acid resistant Polypropylene Fume Hoods, Laminar Flow Workstations & Casework in 12 of the labs. The need for Polypropylene is required due to the acids used by scientists in their testing processes. This is one of the largest Polypropylene projects.

 

LM Air was selected because of their reputation for manufacturing high quality lab equipment, the ability to handle flexible designs, provide high levels of service & deliver within a very aggressive timeline. LM Air worked very closely with the architect & project manager to ensure that all Lab equipment was manufactured to very stringent standards.

Posted in Featured News, News | Comments closed

Battelle Marine Sciences Laboratory Praises LM Air

 

“Pete Daniele, from LM Air Technology, asked if I would be willing to give you an honest appraisal of our experience with his company and their products, which I am happy to do.

 

We are in the process of incrementally renovating all of the individual research laboratories in one of our buildings, and have completed three labs to date. All three of these labs require non-metal construction materials, so we specified polypropylene casework and hoods. When we published our first Request For Proposal for polypropylene casework

 

and fume hoods, using Nuaire specifications, we received our first-time response from LM Air. We had a short lead time for the construction start, and LM Air had the best proposal for meeting our short deadline, as well as the most competitive price. Until that time, we had no experience with LM Air, so we did a thorough check of their references and found them to be very good. Our lead architect and our engineering group decided to give them a try since their references were solid, they had the shortest lead time, and the best price of all the other bidders. In the past, we used Nuaire for our plastic casework and hoods.

 

Some examples of the products that they have supplied and installed in our labs to date can be seen in the attached photos. They have installed their casework and eight hoods (chemical fume hoods, acid fume hoods, and clean hoods) in the three labs that we have renovated so far. The quality, fit, finish and function of their products have proven to be excellent. We have had no problems whatever with their products. They met and exceeded the Nuaire specifications, as well as the many special, challenging design specifications that we requested. Additionally, they always finished on or before the scheduled deadlines; there were no negative issues related to the schedule with LM Air.

 

It’s also important to bring to your attention that we utilized LM Air for the installation of their products in these three laboratories. It’s important because the installation of these custom-made products is an essential component of the quality of the finished product. We found their installation crew to be professional, efficient, safe, and cooperative. Their customer service is the standard to judge all others by; it’s truly exemplary.

 

In summary, we are very satisfied with all aspects of our experience with LM Air. We now specify LM Air for all of our plastic casework and hoods, including the installation.

 

If you have any questions or desire further discussion of our experience with LM Air, please feel free to contact me. Thank you.

 

If you have any questions or desire further discussion of our experience with LM Air, please feel free to contact me. Thank you. ”

 

Patrick Fallon
Construction Manager
Battelle Marine Sciences Laboratory
Pacific Northwest National Laboratory
1529 West Sequim Bay Road
Sequim, Washington 98382
Office: 360-681-4562

 

 

Posted in Featured News, News | Comments closed

LM Air Purchases Assets, Intelectual Property and Customer List of the Cleanroom Division of Laminaire Corporation

Press Release
May 8, 2000

LM Air Technology, Inc. announced, from its corporate office in Rahway, NJ, that it has purchased assets, intellectual property and customer list of the Cleanroom division of Laminaire Corporation.

[break]

LM Air will continue to focus on designing and manufacturing high quality, standard and custom cleanrooms, laminar airflow workstations, mini-environments, filter modules, fume exhaust hoods and wet process stations in the ultra cleanroom environments. The company offers a complete product line of laminated, polypropylene (speciality) and metal cleanroom equipment that have been satisfying cleanroom needs for over 35 years.

 

LM Air is currently involved in an ISO consortium, which will certify them as ISO–2000 compliant and one of the first ISO certified cleanroom manufacturers. They also conform to Federal Standard 209E and are members of the Institute of Environmental Sciences & Technology (IEST).

 

LM Air will leverage their technology and design capabilities to satisfy the demands of their customers in the Biotechnology, Pharmaceutical, Semi-Conductor, Photo/Optics industries and also Laboratories and Universities. LM Air’s trained staff is prepared to satisfy their customer’s cleanroom needs worldwide via company sales representatives and independent manufacturer representatives.

 

“We are committed to providing the highest levels of quality, service and outstanding value, by meeting or exceeding our customers expectations.” said Pete Daniele, president.

 

LM Air’s manufacturing and corporate offices are located at 1467 Pinewood Street, Rahway, NJ 07065, (732) 381-8200, (866) 381-8200 (toll free), (732) 381-4091 (fax).

The company’s web site is www.LMAIRTECH.com with industry and product information.

 

Click here to read this entire press release.

Posted in News | Comments closed

LM Air Technology, Inc. provides Hardwall Cleanroom to Rutgers University

Press Release
Piscataway, NJ –

LM Air recently installed an 1,100 square foot Hardwall cleanroom for Rutgers University. The cleanroom project utilized LM Air’s “Six-Step Solution to Cleanrooms”. The re-circulating cleanroom included an epoxy floor, electrical, Lighting, HEPA Filtered Modules and the internal cleanroom equipment. It was a turnkey application which included 3 separate rooms, one having clear see-thru acrylic wall panels.

 

LM Air specializes in the design / installation of small to mid-sized cleanrooms & labs (for both new projects & renovating existing facilities). LM Air’s Six-Step Solution to Cleanrooms allows customers to focus on maximizing functionality within the cleanroom, while minimizing costs. They are involved from the beginning to end of the project, Design to Installation to Certification, including Project Management. A sampling of recent Cleanroom installations includes NASA, DuPont, University of MD, University of Arizona, and Murty Pharmaceutical.

 

If your organization needs to install a new, or renovate an existing cleanroom or lab, contact LM Air, for your best overall value. To view LM Air’s Six-Step Solution, please visit the web site at www.LMAIRTECH.com/services.htm or via e-mail at Sales@LMAIRTECH.com.

Click here to download this press release.

Posted in Featured News, News | Comments closed