CS, C, CI, TS Series – Horizontal Laminar Flow Work Stations

Our laminar flow work stations more than exceed all industry specification for quality and dependability. As with all of air quality control systems, our laminar flow work stations are easily integrated into preexisting facilities and laboratory infrastructures. Don’t hesitate to contact us today regarding any of our laminar flow work stations or cleanroom systems. We have knowledgeable and experienced engineers eager to answer all of your inquiries.

Applications:

Optical Assembly, Pharmaceutical Preparation, Critical Sample Preparation, Microelectronic Fabrication, Assembly, Food Processing

CS SERIES:

View Model/Dimensions & Sample Drawings

Console Slimline Horizontal Laminar Flow Clean Air Workstation (only 34”D – fits thru standard door opening ).  A free-standing Slimline console design providing an ISO -5 / Class 100 atmosphere in an operator workstation environment. Completely self-contained, it functions effectively in an uncontrolled area. Individually tested & certified to meet or exceed the specifications for Laminar Flow Clean-Air Devices as perInstitute ofEnvironmental ScienceIES-RP-CC-002-86.

C SERIES:

View Model/Dimensions & Sample Drawings

Horizontal Laminar Flow Clean Air Workstation (includes Bullet Legs – 44”D) . A free-standing console design providing an ISO 5 / Class 100 atmosphere in an operator workstation environment. Completely self-contained, it functions effectively in an uncontrolled area. Clearance under the work surface allows for installation of sinks, tanks, plumbing & other special equipment. The unit is stationary, permitting electric, gas & water hookups. Individually tested and certified to meet or exceed the specifications for Unidirectional Flow Clean-Air Devices as per Institute of Environmental Sciences and Technology IEST-RP-CC002.2.

CI SERIES:

View Model/Dimensions & Sample Drawings

Horizontal Laminar Flow Clean Air Workstation – (Isolated Table) – A free-standing console design providing an ISO 5 / Class 100 atmosphere in an operator work station environment.  Completely self-contained, it functions effectively in an uncontrolled area.  The CI series has an isolated work table for critical microscope measurements, or when vibration is extremely important.  This unit features woodboard construction with high pressure laminate exterior, clear acrylic side panels, high efficiency motor blowers, recessed lighting, and solid state airflow control.  Individually tested and certified to meet the specifications for Laminar Flow Clean-Air Devices as perIES-RP-CC-002-86.

TS SERIES:

View Model/Dimensions & Sample Drawings

Table Mount Horizontal Laminar Flow Clean Air Workstation – Designed to be mounted on an existing work bench or optional base cabinet (Table top unit). Provides an ISO 5 / Class 100 atmosphere in an operator workstation environment. Completely self-contained, it functions effectively in an uncontrolled area. Individually tested and certified to meet or exceed the specifications for Laminar Flow Clean-Air Devices as perInstitute of Environmental ScienceIES-RP-CC-002-86.


Filter:

Three inch HEPA (High Efficiency Particulate Air) type, aerosol challenged, zero probed. Aluminum frame mini-pleat design, Minimum efficiency of 99.99% at .3 microns.

Prefilter:

1″ bonded polyfiber media minimizes surface-loading. Quick-release aluminum frame. Easily accessible from front of unit. 78 % arrestance – 56-57 ASHRAE.

Airflow:

Average measured clean air velocity 80 fpm (+/-20 fmp), measured values within +/- 20% uniformity.

Construction:

Woodboard construction for minimum noise & vibration. White and blue plastic laminate finish. Clear acrylic side panels for visibility. Rear-loaded HEPA filter. Protective plastic egg crate diffuser screen in front of HEPA filter keeps uniform air velocity within work area.

Electrical & Power Requirements:

All electrical components are UL Approved. Standard 115V, 15 Amp, 1 pH, 60 Hz. SJO power cord w/ 3-prong ground plug. NEC Electrical Code

Motor/Blower Assembly:

High efficiency motors reduce electrical load. Motors are thermally protected & self-lubricating. Impellor motors or High capacity blowers with direct drive motors. Statically balanced to maintain constant airflow. Motors/Blowers maintain constant required airflow rate up to 2x the initial static pressure.

Lighting:

Recessed 2 pin fluorescent lighting. 125 ft. Candle +/- 20ft.Candles. Plastic prismatic lens cover maximizes light diffusion.

Controls:

Solid state, adjustable airflow control, 80-120 fpm, 15A max. load capacity, Internally mounted to prohibit accidental change. Illuminated switches on face panel for motor & lights.

Options:

  • Electrical duplex receptacle
  • Magnehelic pressure gauge
  • Casters
  • Conductive table laminate
  • Electrostatic device
  • Fixture – air, gas, DI, nitro or vacuum
  • Stainless steel IV rod
  • Ultraviolet germicidal light
  • Clear vinyl front cover
  • Front loaded HEPA filter
  • Explosion proof electrical
  • ULPA filter – .12 micron
  • Stainless steel work surface
  • Polypropylene, Stainless or Painted steel Construction Available

Model/Dimensions:


CS Series:

Dim.(Inches) Motor Ship

Model

W

H

IW

IH

Amps

Lbs.

324-CS

38

59

35

23

3.8

450

330-CS

38

65

35

29

3.8

465

336-CS

38

71

35

35

5.1

485

424-CS

50

59

47

23

5.1

545

430-CS

50

65

47

29

5.1

565

436-CS

50

71

47

35

7.1

600

524-CS

62

59

59

23

5.1

665

530-CS

62

65

59

29

7.1

700

536-CS

62

71

59

35

7.1

720

624-CS

75

59

72

23

7.1

775

630-CS

75

65

72

29

7.6

825

636-CS

75

71

72

35

10.2

860

824-CS

99

59

96

23

10.2

980

830-CS

99

65

96

29

10.2

1020

836-CS

99

71

96

35

14.2

1070

C Series:
LM Air Dim.(Inches) Motor Ship

Model

W

H

IW

IH

Amps

Lbs.

324-C

38

59

35

23

3.8

490

330-C

38

65

35

29

3.8

510

336-C

38

71

35

35

5.1

535

424-C

50

59

47

23

5.1

595

430-C

50

65

47

29

5.1

625

436-C

50

71

47

35

7.1

655

524-C

62

59

59

23

5.1

700

530-C

62

59

59

23

701

735

536-C

62

71

59

35

7.1

770

624-C

75

59

72

23

7.1

835

630-C

75

65

72

29

7.6

890

636-C

75

71

72

35

10.2

925

824-C

99

59

96

23

10.2

1060

830-C

99

65

96

29

10.2

1105

836-C

99

71

96

35

14.2

1150

CI Series:
LM Air Dimensions Motors Tubes Shipping
Model W” H” IW” IH” Qty H/P Amps Qty Watts Wgt. lbs.
324-CI 38 59 35 23 1 1/4 3.8 2 20 490
330-CI 38 65 35 29 1 1/4 3.8 2 20 510
336-CI 38 71 35 35 1 1/3 5.1 2 20 535
424-CI 50 59 47 23 1 1/3 5.1 2 30 595
430-CI 50 65 47 29 1 1/3 5.1 2 30 625
436-CI 50 71 47 35 1 1/2 7.1 2 30 655
524-CI 62 59 59 23 1 1/3 5.1 2 40 700
530-CI 62 65 59 29 1 1/2 7.1 2 40 735
536-CI 62 71 59 35 1 1/2 7.1 2 40 770
624-CI 75 59 72 23 1 1/2 7.1 2 40 835
630-CI 75 65 72 29 2 1/4 7.6 2 40 890
636-CI 75 71 72 35 2 1/3 10.2 2 40 925
824-CI 99 59 96 23 2 1/3 10.2 4 30 1060
830-CI 99 65 96 29 2 1/3 10.2 4 30 1105
836-CI 99 71 96 35 2 1/2 14.2 4 30 1150
TS Series:
Dim.(Inches) Motor Ship

Model

W

H

IW

IH

Amps

Lbs.

324-TS

38

59

35

23

3.8

450

330-TS

38

65

35

29

3.8

465

336-TS

38

71

35

35

5.1

485

424-TS

50

59

47

23

5.1

545

430-TS

50

65

47

29

5.1

565

436-TS

50

71

47

35

7.1

600

524-TS

62

59

59

23

5.1

665

530-TS

62

65

59

29

701

700

536-TS

62

71

59

35

7.1

720

624-TS

75

59

72

23

7.1

775

630-TS

75

65

72

29

7.6

825

636-TS

75

71

72

35

10.2

860

824-TS

99

59

96

23

10.2

980

830-TS

99

65

96

29

10.2

1020

836-TS

99

71

96

35

14.2

1070